FABRILINE BEAMLINE ROLL CONVEYORS

1.) FILL IN DIMENSIONS SHOWN IN THE ACCOMPANYING DRAWINGS.

A.) CONVEYOR END VIEW.

B.) IN-FEED CONVEYOR LENGTH

C.) OUT-FEED CONVEYOR LENGTH

D.) DISTANCE FROM MATERIAL DATUM LINE TO COLUMN FACE OR THEIR OBSTRUCTIONS THAT MIGHT INTERFERE WITH LENGTH MEASURING SYSTEM

E.) DIAMETER OF THE SIDE CLAMP SHAFTS.

2.) LIST NUMBER OF MATERIAL SIDE CLAMPS MOUNTED IN THE ROLL CONVEYORS AND DISTANCE OF EACH FROM THE MACHINE.

3.) WHAT IS THE LENGTH OF LONGEST BEAM TO BE PROCESSED ON THIS MACHINE?

4.) WHAT IS THE CONDITION OF CONVEYOR DRIVE CHAINS?

1. IS THERE SLOP IN THE LINKS?

2. ARE THE CHAINS STRETCHED?

3. ARE THE CHAINS RUSTED?

4. WHAT WOULD YOU CONSIDER THE OVERALL CONDITION OF THE CHAINS TO BE?

   GOOD
    
   FAIR
    
   BAD
    

5. LIST ANY OTHER OBSERVATIONS THAT MAY BE HELPFUL.

    

5.) WHAT IS THE CONDITION OF THE CONVEYOR BEARINGS?

GOOD (ROLLERS ROLL SMOOTHLY WITHOUT SQUEAKING OR GRINDING )
 
FAIR
 
BAD
 

6.) IS THERE ANY CHANGE OF HEIGHT THROUGHOUT THE CONVEYOR? IF SO, WHAT IS THE NEW HEIGHT? (DISTANCE FROM FLOOR TO TOP OF ROLLER)

Fabriline Beamline Inspection list